’03 E-350 Ambulances – Possible A/C Issues Read Below: I had our one of our ’03 E-350 Ambulances in the shop last week for the AC blowing hot. I found that the clamp on the oil fill hose extension tube had worn thru the pressure line to the rear air unit. It had also partially […]
Read the Press Release: Stewart & Stevenson now Valley Power Systems Information about Valley Power Systems, Inc acquisition of Stewart & Stevenson’s Power Products Division provided by Wayne Antonovich: “Effective August 29, 2005, Valley Power Systems, Inc. (Valley) headquartered in Los Angeles (City of Industry), California has acquired the California operations of Stewart and Stevenson’s […]
Fire Magazine Article BY ED BALLAM WEST SAYVILLE, N.Y. – It might be an overstatement, but not by much, to say that nearly all fire apparatus and ambulances built today have some pieces made by Kussmaul Electronics Company Inc. on board. For nearly 40 years, Kussmaul has been quietly carving itself a niche in the […]
Inspections Suggested for 1998-2005 Ford E-350 and E-450 Front Ends May 2005, MERGINET—Emergency service organizations using the Ford E-350 and E-450 model vehicles from the years 1998 through 2005 should inspect the front end right and left spring tower flange for cracking, according to a Technical Service Bulletin (TSB) issued by Ford Motor Company on […]